Kontron CP3-BP8-M - Manual (Page 6)

PD04: CP3-BP8-M CPCI Backplane
Page 6 © 2002 PEP Modular Computers GmbH RID 24229 PD04, Rev. 01
5. Interfaces
5.1 Line Connector
The power supply to the backplane is connected by means of the 3-pole Mate-N-Lok connec-
tor marked ”LINE1” on the reverse side of the backplane.
Figure 3: Orientation and Pinouts of CP3-BP8-M Connector LINE1
5.2 Power Supply Connector
Figure 4: Orientation and Pinouts
of CP3-BP8-M DIN type M Power
Supply Connector
The input voltages to the power supply
unit and the V1 ... V4 output voltages
from the power supply unit to the back-
plane are connected via a 32-position,
DIN type M, female power supply con-
nector.
Warning!
System integrators must ensure that only power supplies which comply
with the pinout as provided in Table 3 are used with this connector!
Pins B2, B5, B28, and B31 do not comply with the CompactPCI Power
Interface Specification.
2
3
1
Table 1-1: Pinouts of CP3-BP8-M
Connector LINE1
Pin Function
1 N or -DC
2 L or +DC
3 PE