Kontron CP3-SVE-M76AC - Manual (Page 7)

RID 24139 PD13, Rev. 01 Page 7
CPCI Power Supply PD13: CP3-SVE-M76AC
2.3 Installation
Thanks to its plug-in compatibility this DIN M-type power supply unit allows for an easy instal-
lation, by which the power supply unit’s male DIN M24/8 power connector is inserted into the
backplane’s mating female connector without the need of any intermediate adaptation.
2.4 Electrical Specifications
Input
Output
Regulation
Input voltage ranges 115/230 VAC, 50/60 Hz, automatic switching
ranges: 90 … 138 VAC or 184 ... 264 VAC
Efficiency > 80 % (typical)
Inrush current limitation
≤
25 A
peak
cold
≤
35 A
peak
warm
Fuse 3.15 AT (internal, not user serviceable)
Hold-up time 115 V: > 30 ms at 100 % load
230 V: > 35 ms at 100 % load
Output power V
1
(5.1 V) voltage: 5.1 V, +5/-3% (including ripple and noise)
current: min 0.0 A; nominal 8.0 A; peak 12 A for 100 ms
Output power V
2
(3.3 V) voltage: 3.3 V, +5/-3% (including ripple and noise)
current: min 0.0 A; nominal 8.0 A; peak 12 A for 100 ms
Output power V
3
(12 V) voltage: 12 V, +8/-7% (including ripple and noise)
current: min 0.0 A; nominal 0.15 A; peak 0.2 A
Ripple V
1
, V
2
: < 50 mV
pp
V
3
: < 200 mV
pp
Total output loads min 0 W; max 75 W for all outputs
Status indication green LEDs for V
1
, V
2
Rise-delay time < 1 s at 115/230 VAC
Start-up time
≤ 15 ms
Line regulation < 0.2 % for V
1
, V
2
at a load of 8.0 A each
Load regulation < 0.5 % for V
1
, V
2