Kontron XMC401 - Manual (Page 17)

XMC401 Introduction
ID 1032-4582, Rev. 1.0 Page 1 - 5
P R E L I M I N A R Y
1.3 Technical Specification
Table 1-1: XMC401 Main Specifications
XMC401 SPECIFICATIONS
Controller
Intel® 82599 Intel® 82599 10 Gigabit Ethernet controller with PCI Express 2.0 interface
and two SFP+ ports
Memor
y
Configuration EEPROM 128 kbit EEPROM for Ethernet controller configuration
Flash 8 Mbit of Flash memory for boot ROM
FRU EEPROM 2 kbit EEPROM for storing IPMI serial EEPROM FRU data
Connectors
SFP+ Two front panel SFP+ cages for connection to SFP+ direct attach copper
cables or SFP+ optical transceiver
XMC One onboard XMC connector supporting PCI Express 2.0 (5 GT/s) with x8
lanes for connection to a carrier board
LEDs
Ethernet Status LEDs Four Ethernet Status LEDs per SFP+ port:
• ACT (green): Ethernet Activity
• LNK (green): Ethernet Link
• 10 GB (green): Ethernet Speed 10 Gigabit
• 1 GB (green): Ethernet Speed 1 Gigabit
S
oftware
Operating Systems There are various operating systems available for the XMC401.
For information relating to the supported operating systems and the NetBoot
feature, please refer to the Kontron web site or contact Kontron.
General
Mechanical XMC-compliant form factor
Power Consumption See Chapter 5 for details.
Temperature Range Operational: 0°C to +55°C
Storage: -55°C to +85°C
Recommended Airflow Volumetric Flow Rate: > 20 m³/h
Sufficient airflow must be provided to ensure optimal operation and long-
term reliability of the XMC401. For further information, refer to the carrier’s
user guide.
Climatic Humidity 93% RH at 40°C, non-condensing (acc. to IEC 60068-2-78)
Dimensions 74 mm x 149 mm single-height XMC card
Board Weight 90 grams