Kontron JRexplus-LX Display Cable - Manual (Page 15)

KTD-S0018-0 Page 13 KAB-ADAPT-LVDStoTTL
Display Cable Guide
5.4 FLEX32 Configurable Pins
Three configurable data lines of the FLEX32 cable allow the use of special panel features. Many displays
have input pins for horizontal/vertical flipping respectively mirroring (signal name i.e. L_R and U_D).
These lines can be set to VCC or GND through solder jumpers. Under no circumstances both solder jumpers
may be set at the same time.
The following table gives and overview:
Pin Designator Link to GND set Link to VCC set
CONF0 R14 / R15 R14 R15
CONF1 R16 / R17 R16 R17
CONF2 R18 / R19 R18 R19
5.5 Electrical Specifications
Supply Voltage
➤
+ 5.0V DC ± 5%
Panel Current (maximal)
➤
600mA
Ambient Temperature
➤
0 to +60°C