Kontron AM4140 IPMI Firmware - Manual (Page 6)

IPMI Firmware AM4140
Page 6 ID 1051-8188, Rev. 1.0
P R E L I M I N A R Y
1.2 Related Publications
The following publications contain information relating to this product.
As a hot-swappable field-replaceable unit (FRU), the AM4140 follows the stringent carrier
grade RASM feature set, namely - Reliability, Availability, Serviceability, Maintainability.
Built in accordance with the AMC.0 specification, the AM4140 is also compliant with the AMC.1,
AMC.2 and AMC.4 specifications and is easily managed via its management features.
As with every Advanced Mezzanine Card (AMC), the AM4140 is equipped with a Module Man-
agement Controller (MMC).
1.3 IPMI in AdvancedMC / AdvancedTCA Environment
The Module Management Controller is a crucial component of any AMC module. Besides act-
ing as a regular IPMI management controller (sensor monitoring, event logging, etc.), it also
provides an interface to all necessary data related to module power requirements and imple-
mented interfaces (E-Keying). Further, it plays an active role in the module hot swap state man-
agement. The carrier IPMI Controller (IPMC) communicates with the MMC using the local IPMB
(IPMB-L) bus. In an ATCA/AMC environment, it is the IPMC that actually turns on/off the mod-
ule (payload) power. However, before the IPMC enables the module payload power, various
criteria must be satisfied by both the carrier and the module, including power requirements and
capabilities, matching interfaces, current module hot swap state, and any other special condi-
tions as specified by the shelf manager policy.
1.4 Module Management Controller Hardware
On the AM4140, the MMC is implemented using an NXP® ARM7 microcontroller with 512 kB
of internal flash and 56 kB of RAM.
Table 2: Related Publications
PRODUCT PUBLICATION
IPMI IPMI Specification V2.0
IPMI IPMI - Platform Management FRU Information Storage Definition v1.0,
Document Revision 1.1
MicroTCA PICMG® MTCA.0 Micro Telecommunications Computing Architecture R1.0
AMC PICMG® AMC.0, Advanced Mezzanine Card Specification R2.0
PICMG® AMC.1, PCI Express R2.0
PICMG® AMC.2, Gigabit Ethernet R1.0
PICMG® AMC.4, Serial RapidIO, Rev 1.0
AM4140 AM4140 User Guide, ID 1046-4973
Kontron’s “U-Boot” Bootloader User Guide, ID 1046-1856
IPMI Tools ipmitool documentation: http://ipmitool.sourceforge.net
IPMI Tools OpenIPMI documentation: http://www.openipmi.sourceforge.net