3 system expansion capabilities, 1 pmc module, 2 xmc module – Kontron CP6003-SA User Manual
Page 23: 3 cp6003-sa-mk2.5sata assembly kit, 4 sata flash module, 5 rear i/o module, 4 board diagrams, System expansion capabilities - 5, Pmc module - 5, Xmc module - 5
CP6003-SA
Introduction
ID 1044-9757, Rev. 2.0
Page 1 - 5
P R E L I M I N A R Y
1.3
System Expansion Capabilities
1.3.1
PMC Module
The CP6003-SA has a 3.3V, rear I/O capable PMC mezzanine interface configurable for ei-
ther 64-bit / 66 MHz PCI or 64-bit/133 MHz PCI-X operation. This interface supports a wide
range of PMC
modules with PCI interface including all of Kontron’s PMC modules and pro-
vides an easy and flexible way to configure the CP6003-SA for various application require-
ments. For information on the PMC interface, refer to chapter 2.10.8, "PMC Interface".
1.3.2
XMC Module
The CP6003-SA has one XMC mezzanine interface for support of x1, x4 and x8 PCI Express
2.0 XMC modules providing an easy and flexible way to configure the CP6003-SA for various
application requirements. For information on the XMC interface, refer to chapter 2.10.9, "XMC
Interface".
1.3.3
CP6003-SA-MK2.5SATA Assembly Kit
The CP6003-SA comes with an optional CP6003-SA-MK2.5SATA assembly kit comprised of
one MMADP-SATA01 module and the necessary components needed for mounting the module
on the CP6003-SA. The MMADP-SATA01 module is required for connecting an onboard 2.5"
Serial ATA HDD or SSD to the CP6003-SA via an onboard SATA extension connector. For fur-
ther information concerning the MMADP-SATA01 module, please refer to Appendix A.
1.3.4
SATA Flash Module
The CP6003-SA provides support for up to 32 GB NAND flash memory in combination with an
optional SATA Flash module, which is connected to the CP6003-SA via an onboard SATA ex-
tension connector. For further information concerning the SATA Flash module, please refer to
Appendix B.
1.3.5
Rear I/O Module
The CP6003-SA provides support for one rear I/O module via the CompactPCI rear I/O con-
nectors. For further information about the compatibility of rear I/O modules with the CP6003-
SA, please refer to the CP6003-SA datasheet.
1.4
Board Diagrams
The following diagrams provide additional information concerning board functionality and
component layout.