Chief Manufacturing NPT Threaded Coupler Accessory CMA-152 - Manual (Page 3)

Installation Instructions Model: CMA-152
3
TOOLS REQUIRED FOR INSTALLATION
• Pipe Wrench
• 5/32" Security Hex Key (provided)
NOTE: Other tools may be required depending on your
method of installation.
PARTS
After unpacking carton, inspect and verify contents (See
Figure 1). If any listed parts are missing or damaged,
contact Chief Customer Service at 1-800-582-6480.
Figure 1: Parts
INSTALLATION
1. Screw adapter (10) onto upper 1-1/2" NPT threaded
column by hand (See Figure 2).
Figure 2: Install Adapter
2. Screw lower 1-1/2" NPT threaded column into
adapter (10) by hand (See Figure 3). Tighten lower
column securely using pipe wrench, orienting cable
management access to desired location.
Figure 3: Install Lower Column
3. Using key (30), install and tighten both screws (20)
securely.
Table 1: Parts
Item Description Qty
10 COUPLER, 1-1/2" NPT 1
20 SCREW, Security Set, 5/16"-18 x 5/16 2
30 KEY, Security Hex, 5/32" 1
COLUMN, Threaded, 1-1/2" NPT (required, not
supplied) 2
10
20
30
Upper Column
10
Lower Column
10
20