Kontron CP342 - Manual (Page 25)

Doc.ID: 34938, Rev 1.0 Page 1 - 11
CP342 Introduction
CUSTOMER SPECIFIC
P R E L I M A R Y
Figure 1-6: CP342_RIO Board (Top View)
1.6 Technical Specifications
Table 1-2: Main Specifications
TYPE SPECIFICATIONS
CP342
Controller Intel® 82546GB, dual channel Gigabit Ethernet, lead free version
Ethernet Two channels of three speed Ethernet: 10/100/1000 Mbit/s
Ethernet Interfaces Two RJ45 front panel connectors
LEDs Two status LEDs per channel, integrated in each connector, yellow and green
Boot Flash Flash memory socket (PLCC32) available for up to 1 MB of removable Flash
memory for user-installed and programmed boot chip (Flash memory is optionally
available with the product)
Speed Configuration Auto-negotiation for speed and switching
Signalling Voltage 3.3 volt (5 volt tolerant)
Plug & Play Design No jumpers to be configured
Power Consumption Source: 3.3 V: consumption: ca. 5.6 watts
Temperature Range Operational: 0ºC to +55ºC Standard
-40ºC to +85ºC E2 (on request)
Storage: -55ºC to +125ºC
Climatic Humidity 93% relative humidity at 40°C, non-condensing
Dimensions 160 mm L x 100 mm W (single height Eurocard)
Board Weight ca. 145 g (with heatsink)
D11
D10
FLASH
Dual
Eth.
Ctrl
J2
J1