Koala Kare KB108 - Manual (Page 2)

Please Note:
To assure proper installation, it is suggested that a qualified person or carpenter install the Koala
Kare Baby Changing Station. Koala Kare Products will not be responsible if the station is not
installed properly.
Koala Kare Baby Changing Stations have been tested to hold a substantial static load. The unit
must be attached to a permanent wall that is capable of holding a substantial load.
Inspection Criteria:
A properly maintained Baby Changing Station:
- Opens and closes smoothly.
- Has both ends of a functioning, non-frayed strap: buckle clicks when closed and strap is
attached at both ends of unit.
- Offers parents liners through a fully stocked liner dispenser. (Dispenser is built into unit).
- Provides a clean, convenient place for customers to attend to their children.
OPERATING INSTRUCTIONS
TOOLS NEEDED
Stud
Finder
Gloves Phillips Head
Screwdriver Level Pencil
Drill 1/8” Drill Bit
(regular and
masonry) 7/32” Drill Bit
(regular and
masonry) Measuring
Tape
HARDWARE PROVIDED
Four 1/4”x 3” Phillips Panhead Wood
Screws Four ¾” x ¼”
Flat
Washers