Kidco BR100a - Manual (Page 3)

FOLLOW THESE
INSTRUCTIONS
CAREFULLY AND
KEEP THEM FOR
FUTURE
REFERENCE
• No part of the bed rail requires lubrication.
• Clean using warm soapy water, or a damp
cloth.
1. Insert side bars (B) with pins facing up, into
back bar (A).
2. Slide closed end of corner brackets on strap
set (D) onto ends of front bar (C). Keep sliding
until a click is heard. L-bracket (D) should be
facing down.
3. Slide side bars (B) into empty corner bracket
of strap set (D) using second set of pins. Ends
of side bars (B) and one pin will be sticking out.
When laid out flat, V-strap and buckle are facing
back bar (A).
Important Information
Maintenance
• Suffocation and Strangulation Hazard.
• Death or Serious Injury Can Occur.
• NEVER place infants in toddler/adult
beds with or without a bed rail.
• Use only for children who have out-
grown the use of a crib.
• NEVER use in place of a crib.
• Use only with children who can get in
and out of bed without help (typically 2
years and up).
• ALWAYS keep bed rail pushed firmly
against mattress and at least 9 inches
from each end of bed.
• NEVER use on adult bed, bunk bed,
water bed or bed with inflatable mat-
tress.
• Use only on adult bed with mattress
support as defined by the manufacturer.
• Discontinue use if any bed rail parts are
damaged or missing.
ENG
4. Slide corner brackets (E) onto ends of side
bars (B) until a click is heard. Finger tabs will be
parallel with front bar (C).
5. Slide extension (F) onto L-bracket of strap set,
until a click is heard.
Assembly
WARNING
3
• Typically for children 2 years and up
• For use on platform beds and mattress/box
spring beds
• Use only original KidCo spare parts
7.
9.
12. 11.
10.
8.
14
MIN.
9 IN.
MIN.
22.8
CM.
MIN.
9 IN.
MIN.
22.8
CM.
G
• Do not use abrasive cleaners or bleach.