Kendon Dual Ride-Up SRL Trailer Retrofit Kit User Manual
Page 5
714-630-7144
www.KendonUSA.com
- 3 -
Retrofit Kit Installation Procedure
Two people are recommended for installation of this retrofit kit. Stabilize your
trailer so it does not move around while doing the work. This makes it easier
and safer. We recommend hooking your trailer up to your tow vehicle and
parking on a flat area of your driveway or another similar area.
Leave the rear section of the trailer in the closed position.
Unpack and unwrap your new retrofit kit. Layout all components and hardware.
Remove the right and left side hinge bolts which attach the rear section to the
front section of the trailer (Observe the assembly order of nut, bolt and washers
as you will be putting them back together in their identical configuration).
Once unbolted, remove the rear section of the trailer and set it on a flat stable
surface.