beautypg.com

When to use tow mode, Paddle shift mode – Jeep 2015 Grand Cherokee SRT - Owner Manual User Manual

Page 417

background image

2. Shift the transmission into PARK, if possible. If not,

shift the transmission to NEUTRAL.

3. Press and hold the ignition switch until the engine

turns OFF.

4. Wait approximately 30 seconds.
5. Restart the engine.
6. Shift into the desired gear range. If the problem is no

longer detected, the transmission will return to normal

operation.

NOTE:

Even if the transmission can be reset, we recom-

mend that you visit your authorized dealer at your

earliest possible convenience. Your authorized dealer has

diagnostic equipment to determine if the problem could

recur.
If the transmission cannot be reset, authorized dealer

service is required.

When To Use TOW Mode
When driving in hilly areas, towing a trailer, carrying a

heavy load, etc., and frequent transmission shifting oc-

curs, select TOW mode, using the rotary switch on the

center console. Selecting TOW mode will improve per-

formance and reduce the potential for transmission over-

heating or failure due to excessive shifting. Refer to

“Selec-Track™” in “Starting And Operating” for further

information.

PADDLE SHIFT MODE

Paddle Shift mode is a driver-interactive transmission fea-

ture providing manual shift control, giving you more control

of the vehicle. Paddle Shift allows you to maximize engine

braking, eliminate undesirable upshifts and downshifts, and

improve overall vehicle performance. This system can also

provide you with more control during passing, city driving,

cold slippery conditions, mountain driving, trailer towing,

and many other situations.

5

STARTING AND OPERATING 415