Shift lever override, What to do in emergencies – Jeep 2014 Compass - User Guide User Manual

Page 97

Text mode
Original mode

SHIFT LEVER OVERRIDE

If a malfunction occurs and the shift lever cannot be moved out of the PARK position,
you can use the following procedure to temporarily move the shift lever:

1. To access the shift lever override, locate and remove the removable plug in the

right side of the shift lever housing.

2. Firmly set the parking brake.

3. Turn the ignition switch to the ACC or ON position without starting the engine.

4. Press and maintain firm pressure on the brake pedal.

5. Using a screwdriver or similar tool, press and hold the override tab through the

access port on the center console.

6. Move the shift lever into the NEUTRAL position.

7. The vehicle may then be started in NEUTRAL.

8. Reinstall the override cover.

WHAT TO DO IN EMERGENCIES