Jeep 2012 Compass - User Guide - Manual (Page 85)

FLUIDS AND CAPACITIES
Component Fluid, Lubricant, or Genuine Part Capacities
Engine Coolant
2.0L, 2.4L MOPAR® Antifreeze/Coolant
Five Year/100,000 Mile Formula
HOAT (Hybrid Organic Additive
Technology) or equivalent. 7.2 Quarts
(6.8 Liters) Includes
heater and coolant
recovery bottle
filled to MAX level.
Engine Oil with
Filter 2.0L, 2.4L API Certified SAE 5W-20 engine
oil, meeting the requirements of
Chrysler Material Standard
MS-6395. Refer to the engine oil
filler cap for correct SAE grade. 4.5 Quarts
(4.26 Liters)
Fuel Selection 2.0L,
2.4L 87 Octane 13.6 Gallons
(51.5 Liters)
(Approximate)
Engine Oil Filter
2.0L, 2.4L MOPAR® Engine Oil Filter or
equivalent.
—
Spark Plugs 2.0L,
2.4L ZFR5F-11 (Gap 0.043 in
[1.11 mm])
—
Automatic
Transmission (CVT) MOPAR® CVTF + 4®
Continuously Variable
Transmission Fluid.
—
Manual
Transmission MOPAR® ATF+4® Automatic
Transmission Fluid or equivalent
licensed ATF+4® product.
—
Rear Drive
Assembly (RDA) MOPAR® Gear & Axle Lubricant
SAE 80W-90 API GL 5 or
equivalent non-synthetic
product.
—
Power Transfer Unit
(PTU) MOPAR® Gear & Axle Lubricant
SAE 80W-90 API GL 5 or
equivalent non-synthetic
product.
—
Brake Master
Cylinder MOPAR® DOT 3 and SAE J1703
should be used or equivalent. If
DOT 3 is not available, then DOT
4 is acceptable. Use only
recommended brake fluids or
equivalent.
—
Power Steering
Reservoir MOPAR® Power Steering Fluid
+4 or MOPAR® ATF+4®
Automatic Transmission Fluid or
equivalent licensed ATF+4®
product.
—
MAINTAINING YOUR VEHICLE
83