beautypg.com

Clock setting, Equalizer, balance and fade, Radio operation – Jeep 2012 Compass - User Guide User Manual

Page 33: Electronics

background image

• Your radio has many features that add to the comfort and convenience of

you and your passengers. Some of these radio features should not be used
when driving because they take your eyes from the road or your attention
from driving.

Clock Setting

• Press and hold the “TIME” button until the hours blink; turn the

“TUNE/SCROLL” control knob to set the hours.

• Press the “TUNE/SCROLL” control knob until the minutes begin to blink;

turn the “TUNE/SCROLL” control knob to set the minutes.

• Press the “TUNE/SCROLL” control knob to save the time change.

• To exit, press any button/knob or wait five seconds.

Equalizer, Balance And Fade

• Press the “TUNE/SCROLL” control knob and BASS, MID, TREBLE,

BALANCE and FADE will display. Rotate the “TUNE/SCROLL” control
knob to select the desired setting.

Radio Operation

Seek Up/Down Buttons

• Press to seek through radio stations in AM, FM, or SAT bands.

• Hold either button to bypass stations without stopping.

Store Radio Presets

• Press the “SET” button once and SET 1 will show in the display. Then

select button (1–6).

• A second station may be added to each push button. Press the “SET”

button twice and SET 2 will show in the display. Then select button (1–6).

Music Type

• Press the “MUSIC TYPE” button to activate this mode. Press the “MUSIC

TYPE” button again or turn the “TUNE/SCROLL” control knob to select
the desired music type (Adult Hits, Country, Jazz, Oldies, Rock, etc.).

• Once a music type is chosen and the icon is displayed, press the SEEK

button and the radio will only search for stations with the selected music
type.

NOTE: The Music Type function only operates when in FM mode.

SETUP Button

• Pressing the “SETUP” button allows you to select between items that are

available in that particular mode.

• Turn the “TUNE/SCROLL” control knob to scroll through the entries.

Push the “AUDIO/SELECT” button to select an entry and make changes.

ELECTRONICS

31