Jeep 2010 Patriot - User Guide - Manual (Page 59)

FLUIDS AND CAPACITIES
Component Fluid, Lubricant, or
Genuine Part
Capacities
Engine Coolant 2.0L, 2.4L MOPAR® Antifreeze/
Coolant Five
Year/100,000 Mile Formula
HOAT (Hybrid Organic
Additive Technology) or
equivalent.
7.2 Quarts (6.8 Liters)
Includes heater and
coolant recovery bottle
filled to MAX level.
Engine Oil with Filter 2.0L,
2.4L
API Certified SAE 5W-20
engine oil, meeting the
requirements of Chrysler
Material Standard
MS-6395. Refer to the
engine oil filler cap for
correct SAE grade.
4.5 Quarts (4.26 Liters)
Fuel Selection 2.0L, 2.4L 87 Octane 13.6 Gallons (51.5 Liters)
Engine Oil Filter 2.0L, 2.4L MOPAR® Engine Oil Filter
or equivalent.
—
Spark Plugs 2.0L, 2.4L ZFR5F-11 (Gap 0.043 in
[1.11 mm])
—
Automatic Transaxle (CVT) MOPAR® CVTF + 4®
Automatic Transaxle Fluid.
—
Manual Transaxle MOPAR® ATF+4®
Automatic Transmission
Fluid or equivalent
licensed ATF+4® product.
—
Rear Drive Assembly (RDA) MOPAR® Gear & Axle
Lubricant SAE 80W-90 API
GL 5 or equivalent
non-synthetic product.
—
Power Transfer Unit (PTU) MOPAR® Gear & Axle
Lubricant SAE 80W-90 API
GL 5 or equivalent
non-synthetic product.
—
Brake Master Cylinder MOPAR® DOT 3 and SAE
J1703 should be used or
equivalent. If DOT 3 is not
available, then DOT 4 is
acceptable. Use only
recommended brake fluids
or equivalent.
—
Power Steering Reservoir MOPAR® Power Steering
Fluid +4 or MOPAR®
ATF+4® Automatic
Transmission Fluid or
equivalent licensed
ATF+4® product.
—
57
MAINTAINING YOUR VEHICLE