Jeep 2010 Liberty - Owner Manual User Manual

Page 71

The front passenger seat assembly contains critical com-
ponents that affect the front passenger airbag deploy-
ment. Correctly functioning front passenger seat compo-
nents are critical for the Occupant Classification System
(OCS) to properly classify the front passenger and calcu-
late the proper airbag deployment. Do not make any
modifications to the front passenger seat components or
assembly.

The following requirements must be strictly adhered to:

• Do not modify the front passenger seat assembly or

components in any way.

• At no time should any Supplemental Restraint System

(SRS) component or SRS related component or fas-
tener be modified or replaced with any part except
those which are approved by Chrysler Group
LLC/Mopar

௡.

WARNING!

Unapproved modifications or service procedures to
the front passenger seat assembly or its related com-
ponents may inadvertently change the airbag deploy-
ment in case of a frontal crash. This could result in
death or serious injury to the front seat passenger if
the vehicle is involved in an accident. A modified
vehicle may not comply with required Federal Motor
Vehicle Safety Standards (FMVSS) and/or Canadian
Motor Vehicle Safety Standards (CMVSS).

If a Deployment Occurs
The airbags are designed to deflate immediately after
deployment.

NOTE:

Front and/or side airbags will not deploy in all

collisions. This does not mean something is wrong with
the airbag system.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE