beautypg.com

Tilt steering column, Programmable features, Getting started – Jeep 2010 Compass - User Guide User Manual

Page 17

background image

TILT STEERING COLUMN

• The tilt lever is located on the steering

column, below the turn signal lever.

• Push down on the lever to unlock the steering

column.

• With one hand firmly on the steering wheel,

move the steering column up or down as
desired.

• Pull upward on the lever to lock the column

firmly in place.

WARNING!

Do not adjust the steering column while driving. Adjusting the steering column while

driving, or driving with the steering column unlocked, could cause the driver to lose

control of the vehicle. Be sure the steering column is locked before driving your

vehicle. Failure to follow this warning may result in severe injury or death.

PROGRAMMABLE FEATURES

Electronic Vehicle Information Center (EVIC) - If Equipped

• Press the EVIC button, located below the

speedometer, until Personal Settings is
displayed on the EVIC. Use the EVIC button to
select one of the following, then press and
hold the EVIC button to select either “ON” or
“OFF”.

15

GETTING STARTED