Jeep 2010 Compass - Owner Manual - Manual (Page 249)

NOTE:
• You may have to remove the connector pin protection
cap from the 16–pin connector port, prior to connect-
ing the cable.
• If the iPod௡ battery is completely discharged, it may
not communicate with the UCI system until a mini-
mum charge is attained. Leaving the iPod
௡ connected
to the UCI system may charge it to the required level.
Using This Feature
By using the provided connection cable to connect an
iPod
௡ to the vehicle’s UCI 16–pin connector port:
• The iPod௡ audio can be played on the vehicle’s sound
system, providing metadata (artist, track title, album,
etc.) information on the radio display.
• The iPod௡ can be controlled using the radio buttons to
Play, Browse, and List the iPod
௡ contents.
• The iPod௡ battery charges when plugged into the UCI
connector (if supported by the specific iPod ௡ device)
Controlling The iPod ா Using Radio Buttons
To get into the UCI (iPod
௡) mode and access a connected
iPod ௡, press the “AUX” button on the radio faceplate.
Once in the UCI (iPod ௡) mode, iPod௡ audio tracks (if
available from iPod
௡) start playing over the vehicle’s
audio system.
Play Mode
When switched to UCI mode, the iPod ௡ automatically
starts Play mode. In Play mode, you may use the
following buttons on the radio faceplate to control the
iPod
௡ and display data:
• Use the TUNE control knob to select the next or
previous track.
• Turning it clockwise (forward) by one click, while
playing a track, skips to the next track.
248 UNDERSTANDING YOUR INSTRUMENT PANEL