Jeep 2009 Wrangler - Owner Manual - Manual (Page 114)

4. Using a rubber mallet, carefully tap the knuckles from
the left and right metal pivot brackets. Remove the soft
top from the vehicle and store in a clean, dry location.
5. Unzip the zipper on the sport bar cover to expose the
pivot brackets. Remove the brackets using a #T30 Torx
௡
head driver. Recover and re-zip the sports bar cover.
Store the pivot brackets and screws in a safe place.
6. Reinstall the hard top. Refer to “Freedom Top Three-
Piece Modular Hard Top — Front/Rear Panel Installa-
tion” later in this section.
Installing the Soft Top
NOTE: The following procedures are for first time set
up only. For future soft top procedures, refer to “Soft
Top” in this section.
112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE