beautypg.com

Smartbeams - if equipped, Smartbeams — if equipped – Jeep 2009 Grand Cherokee SRT - Owner Manual User Manual

Page 132

background image

approximately four minutes after the wipers completely
stop. Refer to “Windshield Wipers and Washers” in this
section.

NOTE:

When your headlights come on during the

daytime, the instrument panel lights will automatically
dim to the lower nighttime intensity. Refer to “Instru-
ment Panel and Interior Lights” for setting the instru-
ment panel lights to full daytime intensity.

SmartBeams — If Equipped

The SmartBeam system provides increased forward light-
ing at night by automating high beam control through
the use of a digital camera mounted on the inside
rearview mirror. This camera detects vehicle specific light
and automatically switches from high beams to low
beams until the approaching vehicle is out of view.

NOTE:

If the windshield or SmartBeam mirror is re-

placed, the SmartBeam mirror must be re-aimed to
ensure proper performance. See your local authorized
dealer.

To Activate

1. Select “Auto Headlamp Low/High Beams? — Low/
High Beam.” Refer to “EVIC — Customer-Programmable
Features” in Section 4 of this manual.

2. Turn the end of the multifunction lever to the AUTO
headlight position.

3. Push the multifunction lever away from you (toward
front of vehicle) to engage the high beam mode.

NOTE:

This system will not activate until the vehicle is

at or above 20 mph (32 km/h).

130

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

This manual is related to the following products: