beautypg.com

Parking brake – Jeep 2008 Compass User Manual

Page 241

background image

WARNING!

Driving through standing water limits your vehi-

cle’s traction capabilities. Do not exceed 5 mph (8
km/h) when driving through standing water.

Driving through standing water limits your vehi-

cle’s braking capabilities, which increases stop-
ping distances. Therefore, after driving through
standing water, drive slowly and lightly press on
the brake pedal several times to dry the brakes.

Getting water inside your vehicle’s engine can

cause it to lockup and stall out and leave you
stranded.

Failure to follow these warnings may result in

injuries that are serious or fatal to you, your
passengers, and others around you.

PARKING BRAKE

When the parking brake is applied with the
ignition on, the Brake Light in the instrument
cluster will come on.

NOTE:

This light only shows that the parking brake is

on. It does not show the degree of brake application.

If the parking brake is applied while the vehicle is
moving, a chime will sound to alert the driver. The chime
will sound up to 10 times or until the vehicle has
returned to a stop.

Before leaving the vehicle, make sure that the parking
brake is set. To set the parking brake, pull up firmly on
the lever. Also place the gear selector in the Park position
(automatic transaxle) or Reverse (manual transaxle). To
release the parking brake, apply the brake pedal, pull up
slightly on the lever, then depress the button on the end
of the lever and push the lever fully down toward the
floor.

STARTING AND OPERATING

241

5