JDC Electronic SA Skywatch Xplorer User Manual

Page 18

1. Backlight

Xplorer 1 – 2 – 3 – 4

To get the backlight to light up keep the button pressed for 1 second and as soon as the backlight lights up, release the button. The backlight

remains illuminated for 3 seconds. If within the 5 seconds which follow you re-illuminate the backlight, it stays lit up for 15 seconds. Beyond

these 5 seconds, it lights up again for 3 seconds.

Note : the backlight lights up in the same way in all modes.

IMPORTANT : intensive use of the backlight reduces the life of the battery / consumption approximately 100 x greater than without

backlight.

2. Modes and mode changing

Xplorer 1 - 2 – 3 – 4

Brief pressure on the button allows you to move to the following mode.

MODES :
Xplorer 1 (1 mode)

Xplorer 2 (3 modes)

Xplorer 3 (4 modes)

Xplorer 4 (9 modes)

1. wind + max. wind

2. wind +temperature

3. wind + wind chill temperature

4. wind + compass

5. wind + altitude and max. altitude

6. wind + relative and absolute pressure

7. record of pressure trends

8. record of relative pressure

9. record of altitude

Please refer to the following sections to consult the functions available in each mode.