Hudson Medical Alternating Pressure Pad - Manual (Page 3)

Introduction Product Description
This manual should be used for initial set up of the alternating pressure
pad and pump system and for reference purposes.
General
The 8200 series is a high quality and affordable air support surface
system suitable for pressure ulcer prevention and treatment. It has
been specifically designed for prevention of bedsores and offers an
affordable solution to 24-hour pressure care.
Intended Use
The 8200 series is intended to reduce the incidence of pressure ulcers
while optimizing patient comfort. It also provides the following:
• Individual care in both a homecare and long-term care setting
• Pain management as prescribed by a physician
Contraindication
Patient conditions for which the application of pressure relieving
therapy on an alternating pressure system is contraindicated as
follows:
• Cervical or skeletal traction
• Unstable spinal cord injuries
Pump
1. Power Switch: The switch is at the right side of the pump.
Turn ON/OFF the power, the pump will start/stop operation.
2. Inflation Nozzles: Connect the inflation tubing to nozzles.
3. Pressure-adjust Knob: Turn the Min./Max. knob to set a
comfortable pressure level.
Features:
• New and Improved Quiet Pump Technology.
• 2-6.4 Liter per Minute Output
• Adjustable Pressure Knob
• 6 Minute Cycle Time
• Built in Mounting Brackets for Bed
• 6 Foot Power Cord
• 12 Month Warranty
Bubble Pad
• Dimensions: 78”L x 34”W x 2.5”H
• 130 Individual Bubble Cells for Maximum Surface Coverage
• Positioning Flaps Secures Pad to Mattress
• 300 lb. Weight Capacity
• 3 Months Warranty
1
3
2