Huawei Ascend G630-U20 User Guide - Manual (Page 71)

Sharing data
66
Turning on Huawei Beam
1. On the home screen, touch then the All tab.
2. Under WIRELESS & NETWORKS , touch More… .
3. Touch the NFC switch to turn on NFC.
4. Touch NFC then the Huawei Beam switch to turn on Huawei Beam .
Sharing a web page or contact through Huawei Beam
Before you use Huawei Beam to share a web page or contact, make sure that
both phones are not locked and that NFC and Huawei Beam are enabled.
1. Select the web page or contact you want to share.
2. Place the two phones back to back. After a connection is set up, the
phones play a tone, and the web page or contact screen shrinks.
3. Touch the shrunken screen to display its information on the other phone.
Connecting your phone to a computer
When you connect your phone to a computer using a USB cable, your phone
will display a notification prompting you to select a connection type.
MTP mode
The Media Transfer Protocol (MTP) is used to transfer media files, such as
pictures, songs, and videos, between your phone and a computer. The MTP
mode is only compatible with Windows Media Player 10 or later.
1. Use a USB cable to connect your phone to the computer.
2. On the USB computer connection screen, choose Media device (MTP) .
The phone driver is then automatically installed on the computer.
3. After the driver is installed, follow the onscreen instructions on the
computer to view or transfer files.