Home Legend Engineered Ply T&G - Manual (Page 10)

Doc. ID: 140 Rev: 2 Effective: 2/24/2014 Page | 10
Finishing Touches
• Clean the floor.
• Use matching putty where necessary
• Install or reinstall all wall trim pieces. Nail them through the wall, but not to the subfloor to avoid restricting the expansion gap.
• Install transition trim pieces. Nail them to the subfloor, not the flooring.
• At doorways, transitions should be used to protect the edges of the floor and to provide a decorative transition from one floor type to
another.
• If the floor is to be covered, use a breathable material such as cardboard. Do not cover with plastic.