Gastroback 42812 Design Bistro Oven Advanced 28L - Manual (Page 14)

Do not handle the appliance or any part of it with violence. Do not insert any foreign
objects in the oven and do not poke in the heating rod, to avoid risk of electric shock and
damage of the heating elements.
1. Turn off the appliance, unplug from wall outlet and let it cool down before cleaning.
2. Clean the glass door with a nylon pad and warm dishwater. Do not use a spray glass
cleaner.
3. To remove used accessories, open the door, pull the rack forward and out. Wash in
warm dishwater. To remove stubborn spots, use a polyester or nylon pad and let the acces-
sories soak for a few minutes in warm dishwater. Do not use abrasive cleaners, cleaning
pads, corrosive chemicals (disinfectant, bleach) or any sharp or hard objects (i.e. metal
scouring pads) for cleaning, for this could damage the surfaces. Rinse under running water
and dry thoroughly. Leave all parts dry naturally.
NOTE: Do not clean the crumb tray, the baking tray, drip rack, handle and the pizza tray
in the dishwasher.
Cleaning stubborn residues inside the oven
You can burn off stubborn residues such as grease and spillage.
Connect the power cord to the power outlet and press the function button. The function but-
ton and the function/time and temperature switch will illuminate in blue. Turn the function/
time and temperature to a function where you can set a temperature (heat from below,
convection heat or pizza). Press the temperature button. The temperature button and the
function/time and temperature switch will illuminate in blue. Set the temperature to 235
degrees. Press the time button. The time button and the function/time and temperature
switch will illuminate in blue. Set the cooking time to 30 minutes. Turn off the oven by press-
ing the select/start and stop button once the heating element is no longer smoking. Pull the
plug, and leave it to cool off completely. Wipe the oven compartment once more to remove
burned remnants. Clean the oven compartment and the heating elements with a tightly
wrung cloth that has been soaked in warm dishwater (refer to ´Cleaning the inside - non-
stick coating`).
Cleaning the inside - nonstick coating
WARNING: Turn off the appliance, unplug from wall outlet and let it cool down before
cleaning. Clean the inside of the appliance by wiping it with a damp cloth. A little deter-
gent can be added if the appliance is heavily soiled. Do not use any abrasive cleaners or
scouring pads as they may harm the coating. Dry with paper towel or soft cloth.
Cleaning the exterior
WARNING: Turn off the appliance, unplug from wall outlet and let it cool down before
cleaning the outer surface. Wipe with a damp cloth or sponge and dry with paper towel or
soft cloth.
WARNING: Make sure that no water gets into the vent holes when cleaning the exterior.
38