Unpacking – Chicago Electric 96299 User Manual
Page 8
SKU 96299
For technical questions, please call 1-800-444-3353.
PAGE 8
Lithium Battery Charging Safety
Do not leave unattended while charging.
1.
Battery charging should be done by adults only.
2.
Charge on non-flammable surface and keep away from flammable items.
3.
Turn charger off when battery is charged, and unplug charger from battery-powered
4.
device.
Disconnect AC wall chargers from outlets while not in use.
5.
If battery-powered device has been damaged, immediately stop use, unplug, and
6.
safely move away from flammable materials.
Follow instructions for charging battery. Do NOT charge longer than
7.
recommended.
SyMBOLOGy
Double Insulated
Canadian Standards Association
Underwriters Laboratories, Inc.
V~
Volts Alternating Current
A
Amperes
n0 xxxx/min.
No Load Revolutions per Minute (RPM)
UNPACKING
When unpacking, check to make sure that the product is complete and undamaged.
If any parts are missing or broken, please call Harbor Freight Tools at the number shown
on the cover of this manual as soon as possible.
REV 08c
- Auto-darkening Welding Helment with ANSI-Approved Lens 91214 (10 pages)
- 10" Compound Miter Saw with Laser Guide 69683 (20 pages)
- 95629 (39 pages)
- 12V Lithium-Ion Multifunction Tool 67707 (15 pages)
- 96405 (19 pages)
- 44567 (28 pages)
- Electric Impact Wrench 68099 (16 pages)
- 1/2" vaRiaBle SPeeD ReveRSiBle HEAVY DUTY DRILL 69452 (16 pages)
- 96035 (20 pages)
- 94882 (16 pages)
- 94739 (20 pages)
- CORDLESS SPRAY GUN 90880 (14 pages)
- MIG-100 91124 (13 pages)
- 9"Angle Grinder 93179 (12 pages)
- Heavy Duty Oxy - Acetylene Welding Outfit 92496 (20 pages)
- 18 Volt Corldess Impact Driver 68853 (12 pages)
- 67616 (16 pages)
- 91332 (8 pages)
- 12V Lithium CordLess drill 69360 (14 pages)
- 7" Angle Grinder 69454 (20 pages)
- Power Tools/ Electric Drywall Screwdriver 9624 (12 pages)
- 1/3 Sheet Finishing Sander 94338 (12 pages)
- Wire Feed Welder MIG 170 (32 pages)
- 97717 (15 pages)
- STUD WELDER DENT REPAIR KIT 3223 (9 pages)
- 99702 (22 pages)
- 68568 (12 pages)
- 45338 (15 pages)
- Power Tools 12" DOUBLE-BEVEL SLIDING COMPOUND MITER SAW WITH LASER GUIDE 69684 (20 pages)
- Circular Saw with Laser 95004 (18 pages)
- Power Tools / 1" Variable Speed SDS Rotary Hammer 69276 (16 pages)
- 12V Cordless Auto-Hammer 68364 (12 pages)
- Flexible Shaft Grinder/Carver 40432 (12 pages)
- 47991 (8 pages)
- 40388 (17 pages)
- MIG 200 93804 (36 pages)
- Stapler/Nailer 93749 (12 pages)
- 98107 (20 pages)
- 92880 (16 pages)
- 7.5 Amp Reciprocating Saw 69067 (16 pages)
- 66127 (12 pages)
- HARBOR FREIGHT TOOLS 98753 (11 pages)
- 67845 (16 pages)
- 1/2'' Electric Impact Wrench 45252 (16 pages)
- 14 Industrial Cut-off Saw 68104 (12 pages)