Gastroback 41404 Electric Sausage Cutter Automatic - Manual (Page 7)

wArning: Do not operate the device at any time, in case fluids are on top or penetrated
the device. In order to avoid injuries caused by electrical current, fire an/or damage of the
device, do not touch the device in this case, and just disconnect the device from the power
outlet immediately (Pull the power plug!).
Disconnect the device from the power outlet (Pull the power plug!), when it is not in use.
CArE And ClEAning
note: For commercial use you are bound to clean the appliance at the end of each day to
avoid food poisoning.
wArning: To avoid injuries to persons and damage, always release the On/Off button,
wait for the motor to stop completely and unplug the appliance immediately after operation
and before dismantling or cleaning the appliance. With the appliance connected to the
power supply, do not touch the assembled blade with your hands or any objects. The blade
is very sharp! Always handle the blade with care.
Do not place the appliance or power cord in an automatic dishwasher. Do not immerse
the motor housing or power cord in any liquids or spill any liquids on it. Always wipe off
spilled liquids immediately. Do not pour or drip any liquids on the motor housing or power
cord. Do not place the appliance on wet or damp surfaces. When liquids are spilled on
the motor housing, immediately unplug the appliance and dry the motor housing to avoid
risk of electric shock or fire. Always handle with care and without violence especially when
assembling or dismantling the blade.
Caution: Do not use abrasive cleaners, cleaning pads, corrosive chemicals (disinfectants,
bleach) or any sharp or hard objects (i.e. metal scouring pads) for cleaning, as this could
damage the surfaces. Carefully clean the appliance with a damp sponge or cloth and warm
soapy water. Soak stubborn residues on the blade in warm dish-water for ca. 10 minutes
and then remove the residues with a soft washing brush. For your convenience, you can
clean the blade in an automatic dishwasher (in the cutlery tray).
1. Release the nuts that are attached to the cover turning them anticlockwise in order to
remove the cover. Lift the cover straight across the nuts and then towards your body across
the chevron.
Caution: The blade is laying open. Beware not to cut yourself.
2. Wipe the motor housing and power cord with a damp soft cloth. Take care not to spill or
drip water or any other liquids on the motor housing.
3. Disassemble the blade and the chevron for cleaning. Release the nut on top of the blade
using a combination spanner. Take off the nut and take the blade off the holder. Take off the
nuts of the chevron using a cross spanner.
Attention: Ensure not to lose the grommets.
Clean the blade, the chevron and the cover with a soft nylon washing brush and warm dish-
water. Rinse the parts afterwards thoroughly under running water. Do not touch the blade
with your hands to avoid injuries. For your convenience, you can clean the blade, chevron
and the cover in an automatic dishwasher. Soak stubborn residues in warm dish-water for
ca. 10 minutes before cleaning.
4. Thoroughly dry the motor housing and all parts of the appliance after each cleaning and be-
fore assembling the appliance. Leave all parts to dry naturally out of reach of young children.
17