Gastroback 40981 Hand Mixer Digital Home Culture - Manual (Page 8)

returned to “0”, the appliance will stop operating. If attempting to use high speed settings,
increase the speed step by step to avoid excessive splashing.
In addition, the Handmixer features a Boost button for a short high-speed operation.
CAUTION: Do not use the Boost button for more than 3 minutes, to avoid overheating.
To turn the appliance ´Off` you have to turn the speed control into position ‘0’ (continue to
press the ´-` switch until the display shows ´0`) and the On/Off switch to ´Off`.
Operation
Before First Use
Remove all promotional materials and packing as well as any foreign objects, but do not
remove the model label. Before first use and after a long period of storage, clean the
processing tools in warm soapy water (see Care and Cleaning).
Using the Handmixer Digital
WARNING: Always switch ´Off` the appliance, wait until the motor stops completely and
unplug the appliance before lifting the processing tools out of the food, assembling/disassembling
the processing tools or laying down the appliance. Each processing tool is assigned only to
one of the two tool holes in the bottom of the motor housing. Insert the processing tool with
washer on the shaft in the wide tool hole. Only insert the processing tool without washer into the
narrow tool hole. Only use matching pairs of processing tools to avoid damage of the appliance.
Before connecting the appliance to the mains power supply, always ensure that the appliance
is assembled correctly, according to the following instructions. Do not touch the processing
tools with your hands or any objects (i.e. hair, clothes, cooking utensils), when they are
mounted and the appliance is connected to the mains power supply. Before switching ´On`,
immerse the processing tools in the food, to avoid excessive splashing and dripping of liquids
onto the appliance.
CAUTION: Do not use any fragile vessels with the appliance (i.e. fine drinking glasses or
china). It is recommended to use suitable high-sided, medium-sized stainless steal or plastic
vessels. During operation, prevent the processing tools from touching the interior walls of the vessel.
1. Prepare your food in a sufficiently large and high-sided vessel.
2. Ensure, that the appliance is switched ´Off` (speed control ‘0’) and unplugged.
3. Select the suitable pair of processing tools: dough hooks or whisks (see Processing Tools
and Eject Button).
4. Insert the shafts of the processing tools in the tool holes in the bottom of the motor housing,
twisting slightly until they engage.
Each processing tool is assigned only to one of the two tool holes in the bottom of the motor
housing. The processing tools with washer on the shaft can only be inserted in the wide tool
hole. The shafts must be locked on firmly to the motor housing and may not fall or wobble.
20
40981_hc_handmixer_manual.qxp 16.04.2007 08:33 Seite 20