beautypg.com

Timer function, Care and cleaning – Gastroback 40981 Hand Mixer Digital Home Culture User Manual

Page 10

background image

Timer function

Once operating the appliance, the timer (at the bottom part) will start
counting automatically. This allows user to know the total time for blending
or mixing food every use. Once the appliance stops running, the timer
will automatically return to 00:00 (see picture). When the timer counts up
to one hour (60:00), the appliance will stop automatically. It will operate
again once pressing the speed control “+” button.

Care and Cleaning

WARNING: To avoid injuries to persons and damage, always switch ´Off` the appliance,
wait for the motor to stop completely and unplug the appliance immediately after operation
and before laying it down, disassembling or cleaning the appliance. With the appliance
connected to the power supply, do not touch the assembled tools with your hands or any
objects.

DO NOT place the appliance or power cord in an automatic dishwasher. Do not immerse
the motor housing or power cord in any liquids or spill any liquids on it. Always wipe off
spilled liquids immediately.

CAUTION: Do not use abrasive cleaners, cleaning pads, corrosive chemicals (disinfectants,
bleach) or any sharp or hard objects (i.e. metal scouring pads) for cleaning, for this could
damage the surfaces. Carefully clean the appliance with a damped sponge or cloth and
warm soapy water.

1. Switch ´Off` (speed control ‘0’), wait for the motor to stop completely and unplug
the appliance from the power outlet.

CAUTION: Always handle with care and without violence. To disassemble the processing
tools, always press the Eject button. Do not pull out the processing tools violently.

2. Hold the processing tools over a bowl or sink and press the Eject button to remove the
processing tools.

3. Clean the processing tools with a soft nylon washing brush and warm dish-water. Rinse
the processing tools thoroughly under running water. For your convenience, you may clean
the processing tools in an automatic dishwasher (in the cutlery tray).

Soak stubborn residues on the processing tools in warm dish-water for ca. 10 minutes and
then remove the residues with a soft sponge.

WARNING: Do not place the motor housing or power cord in an automatic dishwasher.
Do not use any hard or sharp utensils for cleaning. Do not immerse the motor housing or
power cord in water or any other liquid. Do not pour or drip any liquids on the motor housing
or power cord. Do not place the appliance on wet or damp surfaces. When liquids are spilled
on the motor housing, immediately unplug the appliance and dry the motor housing to avoid
risk of electric shock or fire. Always handle with care and without violence.

22

40981_hc_handmixer_manual.qxp 16.04.2007 08:33 Seite 22