Gastroback 40998 Vital Mixer - Manual (Page 11)

4. After a few seconds turn the ON/OFF-switch to position ›0‹ (OFF) to turn off the appliance.
5. Once the blades have come to a stop, grasp the blender jug by the handle and remove
the jug from the motor base. Afterwards you can remove the lid to check the product or
push solid or viscous ingredients with a wooden or plastic spoon down gently.
If you wish to add other ingredients, use the beaker from the lid. To do this, turn the beaker
first anti-clock-wise and then pull it up and out. Put the ingredients through the resulting hole
and put the beaker afterwards back on.
You may possibly want to run the appliance once more for a few seconds until the product
has the desired texture. Return the blender jug onto the motor base. You can then turn on
the appliance again.
6. When the product has the desired consistency, turn the appliance off (ON/OFF-switch
to position ›0‹) and remove the blender jug from the appliance. Then remove the lid from
the blender jug. Flowable products - from drink to viscous dough - you can pour from the
blender jug. Then you can clean the blender jug immediately according to the instructions.
Important: Do not leave to dry any food residues on the parts of the appliance. Clean the
equipment immediately after each use in accordance with the instructions ›Care and cleaning‹.
Care and CleanIng
warnIng: Wear appropriate gloves when working with hot liquids. Be careful not to
burn yourself on the blender jug or scald spouted or overflowing liquids or steam.
attention: Never use hard or sharp-edged objects, caustic cleaning products (disinfec-
tants), scouring aids (scourer), or abrasives to clean the appliance or the any accessories.
Do not apply any violence when cleaning the knife insert so as not to bend the blades and
not to damage the mounting. Never clean the appliance or any components of it in the
dishwasher.
Cleaning the Blender Jug
warnIng:
The blades of the knife insert are sharp. Treat the blades carefully and wit-
hout violence, so as not to cut you and not to damage the blades.
1. Empty the blender jug completely and rinse loosely adhering food with clean water.
2. Then fill hot detergent solution into the blender jug. The blades should be covered with
the solution. Seal the jug with the lid, turn the appliance on (switch position: ›1‹) and let it
work for a few seconds.
3. Switch the appliance off (ON/OFF-switch position ›0‹ (AUS/OFF). Wait until the blades
have come to a stop, and remove the blender jug from the motor base.
4. Unplug the power plug from the outlet.
5. Remove the lid from the blender jar and pour out the detergent solution. Remove residue on
the walls of the blender jar. You can easily remove clinging residue with a plastic cleaning.
warnIng: Use extreme caution when working in the area of the blades; be careful not
to cut on the sharp blades and not to damage the blades.
Important: In most cases, the blender jug will already be hygienically clean. However,
should food residues still are adhering to the knives, then disassemble the bottom of the jug
and clean the components individually.
27