Gastroback 42712 Design Coffee Advanced - Grind & Brew User Manual
Page 14
46
2. pre-warm the Cup or travel mug
A warm cup will help maintain the coffee’s optimal temperature and keep coffee hotter for
longer. Fill the cup with hot water for about 30 seconds then discard the water. Place the
cup into position under the drip stop outlet.
tip: For taller cups and travel mugs, remove the drip tray at the base of the machine. Press
the OPEN button to open the swing-out door. Insert the cup/mug into the drip tray cavity
before closing the swing-out door. The maximum cup/mug dimensions are approx 18cm
height, 7cm diameter.
REMOVE DRIP TRAY, OPEN DOOR,
INSERT CUP, CLOSE DOOR.
3. select ‘single Cup’ mode
Press the SINGLE CUP button. The LCD screen will display a cup symbol and the current cup
size selected. Continue pressing the SINGLE CUP button to select the desired size.
There are 9 size options to accommodate for different amounts of milk or cup sizes. Below
is a guide to the amount brewed at each setting. Always ensure your cup is an adequate
size for the setting selected.
setting Amount BreweD
1
~ 225 ml
2
~ 275 ml
3
~ 325 ml
4
~ 375 ml
5
~ 425 ml
6
~ 475 ml
7
~ 525 ml
8
~ 575 ml
9
~ 625 ml
The amounts above are approximate only. Actual amounts may vary due to the type of filter
used, the coffee bean size, roast, blend and freshness, or amount and type of pre-ground
coffee used.