Fiilex P100 - Manual (Page 9)

Specifications
For Your Safety
•Do not attempt to disassemble the body of P100.
•Do not install P100 in a damp or wet area.
•Do not cover the air vents.
•Use only the included power supply.
Failure to do so may cause damage to the LED light.
•Use only a soft, dry towel to gently clean the exterior of the light.
•Do not attempt to disassemble deform, solder, or heat
battery.
•Do not insert battery with different connector.
•Stop using battery if it expands or if temperature reaches
over 60°C or 140°F.
•Do not short circuit battery.
Size 5.8” (Length) × 2.8” (Width) × 2.8” (Height)
Light Weight 0.59 lb/ 270 g
LED Dense Matrix LED
Thermal Design Passive Cooling System (Without Fan)
CCT Range Continuous from 3000K to 5600K
CRI >90
Power Consumption 12W Max.
Input 10 to 16V DC
AC Adapter 100-240V AC, 50-60Hz (In) / 12V DC , Min.12W (Out)
Battery Li-ion/Rechargeable Battery/11.1V 2600mAh/29Wh
Operating Temperature 0 to 40 °C
7