FAB Defense MP5-RS - Manual

RS Installation - 5 MP
Step 1. Remove original Handguard
Step 2. Insert the MP5-RS first on the rear
side of the Barrel by pushing it up into its
correct position. Then insert front end.
Step 3. Insert the Bolts; the short one in
front and the longer one in the opposite
side of the rail.
Step 4. Fasten the Bolts using a 4mm
Allen Wrench.
43, Yakov Olamy St.
Mishmar Hashiva
ISRAEL 50297
Tel: +972 3 960 3399
Fax: +972 3 960 3312
defense.com - www.fab Website:
WARNING!
Make sure your Weapon is unloaded before you begin any procedures.