ETS-Lindgren 7000-001 EMCenter Modular RF Platform - Manual (Page 30)

30 Manual Control of the EMCenter www.ets-lindgren.com
S TATUS B OX
A status box for each slot displays to the right of the slot number. The box
displays an overview of the main parameters for each installed card. This can be
the actual field strength for a field probe or the positions of the different switches
in case of an EMSwitch ™ plug-in card. If no card is installed in a slot, the
Status box will display Available.
To display or change the data and configuration parameters of a card, press the
Status box for that card.
C ONTROL B UTTONS
Depending on the card installed, relevant control buttons will appear. These
buttons are used to start the card or to control the status of the card. See the
separate manual for the specific card for more information. For a description of
common control buttons, see page 25.
L OCAL M ODE
Local control is disabled once the EMCenter has been operated by remote. To
regain local control, press Go to local in the bottom right of the Home screen.
(Option is available when the EMCenter is connected to a computer.)