ETS-Lindgren 3625-2 LISN - Manual (Page 7)

www.ets-lindgren.com Introduction 7
1.0 Introduction
The ETS-Lindgren Model 3625/2 Line Impedance Stabilization
Network (LISN) is a two-channel low pass filter network built with a 5 µH coil.
It is designed to isolate an electrically-operated device from an external power
source so that high frequency conducted measurements may be made in
accordance with certain electronic standards as specified by the FCC and
MIL-STD.
Data
Characterizations for each measurement port of the Model 3625/2 Line
Impedance Stabilization Network (LISN) are included with the unit. The graphs
provide individual plots of both impedance and insertion loss data.
A Certificate of Calibration Conformance is provided with each Model 3625/2.
ETS-Lindgren Product Information Bulletin
See the ETS-Lindgren Product Information Bulletin included with your shipment
for the following:
 Warranty information
 Safety, regulatory, and other product marking information
 Steps to receive your shipment
 Steps to return a component for service
 ETS-Lindgren calibration service
 ETS-Lindgren contact information