ETS-Lindgren 3162-02 Field Generating Antenna - Manual (Page 13)

Maintenance | 13
2.0 Maintenance
Before performing any maintenance,
follow the safety information in the
ETS-Lindgren Product Information
Bulletin included with your shipment.
Maintenance of the Model 3162 Series is
limited to external components such as
cables or connectors.
If you have any questions concerning
maintenance, contact ETS-Lindgren
Customer Service.
Storage Recommendations
When not in use, store the antenna in a dry area. Place the antenna on the floor
or a shelf with the side extensions perpendicular to the surface. If necessary, the
extensions may be removed for storage. If you remove the sides, make sure that
the contact area is clean prior to reassembling the antenna.
Annual Calibration
See the Product Information Bulletin included with your shipment for information
on ETS-Lindgren calibration services.
Service Procedures
For the steps to return a system or system component to ETS-Lindgren for
service, see the Product Information Bulletin included with your shipment.
WARRANTY