ETS-Lindgren 3145BDP Dual-Polarized Log-Periodic Dipole Array User Manual
Page 19
Mounting the Model 3145BDP
|
19
5.0 Mounting the Model 3145BDP
Before connecting any components, follow the
safety information in the ETS-Lindgren
Product Information Bulletin included with your
shipment.
Model 3145BDP Base
The base of the Model 3145BDP Dual-Polarized Log-Periodic Dipole Array
features four mounting holes and two Type N connectors. The holes may be
used to mount the antenna to the optional ETS-Lindgren 109620 Pedestal, or to
a customer-defined mounting solution. For information on the 109620 pedestal,
see page 7.
Mount the antenna with one-inch diameter fiberglass mounting studs, and then
connect N-type coaxial cables from the connectors to a generator or receiver. A
mounting diagram is provided in the next section.