Eden DC-210XLT Metro 2003 - Manual (Page 3)

3
General Description
The DC-210XLT system is 23” x 21 ½” x 18 ”. It weighs only 85 Lbs. The Metro
features a one piece aluminum chassis, High efficiency power transformer, Dual
channels, thermostatically controlled fan, automatic limiter, a high temperature
Auto-limiting system, and international power supply voltages are available on
every model. The Output Power of the 600 Watts RMS @ 2 Ohms, 400 Watts
RMS @ 4 Ohms, and 240 Watts @ 8 Ohms output at full power. The THD is less
than .02%. The Metro also features a hybrid preamplifier consis ting of a 7025
vacuum tube with Bi-Fet op-amps and overall modular construction.
Other professional features include: Fan cooling, Dual effect loops, Dual channel
selected D.I., Front end compressors for each channel, Enhance Control, Three
Band E.Q. with semi parametric E.Q. on channel (1), 5 band tone on channel (2),
Compressor Bypass, input pad, Tune to Mute, internal speaker on/off switch and
Stereo Head Phones.
The unit carries a two year limited Warranty. Always use an authorized service
center or the factory if you ever have a problem with your unit. If you have any
questions about the operation of your unit, please call us at Customer Service and
ask for technical assistance @ 847-949-0444.
Description of the Front Panel Controls
Channel (1)
Input Jack Channel (1)
The input signal is inserted here for normal operation. Because of the wide level
range available from our special input and gain circuitry, only one input jack is
required for both passive and active instruments.
Channel (1) Opera ting Characteristics
The number (1) channel is an all Bi-FET channel with a smooth crisp sound and a
simple easy to use and very pleasant sounding three band E.Q. section.