Crestron electronic Multimedia Presentation System 250 MPS-250 - Manual (Page 3)

Connectors – Audio
PROG OUT: (1) 5-pin 3.5mm detachable terminal block, stereo line-level output
Output Impedance: 200 ohms balanced, 100 ohms unbalanced
Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced
REC OUT: (1) 5-pin 3.5mm detachable terminal block, stereo line-level output
Output Impedance: 200 ohms balanced, 100 ohms unbalanced
Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced
Note: Does not include relay mute
SPEECH OUT: (1) 3-pin 3.5mm detachable terminal block, mono line-level output
Output Impedance: 200 ohms balanced, 100 ohms unbalanced
Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced
SPEAKER: (1 or 2) 2-pin 5mm detachable terminal blocks, speaker-level audio outputs
Wire Size: Connector accepts 12 AWG maximum
Output Power (MPS-250): 20W RMS per channel stereo into 8 ohms, 4 ohms tolerant
Output Power (MPS-250-70V): 40W RMS mono at 70 Volts
Output Power (MPS-250-100V): 40W RMS mono at 100 Volts
AUD IN 1 - 5: (5) 5-pin 3.5mm detachable terminal blocks, stereo line-level inputs
Input Impedance: 24k ohms balanced/unbalanced
Balanced Input Level: -20 to +12 dBV; 4 Vrms maximum
Unbalanced Input Level: -20 to +6 dBV; 2 Vrms maximum
MC/LN 1 - 2: (2) 5-pin 3.5mm detachable terminal blocks, comprises (2) mic/line inputs
Balanced Mic Input Level: -52 to -12 dBV, 240 mVrms maximum
Balanced Line Input Level: -28 to +11 dBV, 3.7 Vrms maximum
Unbalanced Line Input Level: -34 to +5 dBV, 1.85 Vrms maximum
Mic Input Impedance: 3.9k ohms, accepts 60 to 600 ohm source
Line Input Impedance: 19k ohms balanced, 9.5k ohms unbalanced
Phantom Power: 10 mA (total) @ 48 Volts DC, software enabled to both mic inputs
Connectors – Video
COMP/Pb, Y/Y, C/Pr 1 - 2: (2) sets of (3) BNC female video inputs
Each set configurable as:
(1) Component/HDTV (YPbPr) video input, or
(1) S-Video (Y/C) input, or
(1) Composite input
Input Level/Impedance: 1 Vp-p, 75 ohms, nominal
DC Offset: Insensitive to DC offset (AC coupled)
Video signal sensing on COMP/Pb or Y/Y
RGBHV 3 - 5: (3) DB15HD female, RGBHV or Component/HDTV inputs
Format: RGBHV, RGBS, RGsB, or YPbPr
RGB/Video Input Level/Impedance: 1 Vp-p, 75 ohms, nominal
H/V Sync Input Level: 2 to 5 Vp-p
H/V Sync Input Impedance: 75, 500, or 1k ohms individually selectable for H and V
Video signal sensing on H, Gs, and Y; defeatable DDC pull-up resistors
QM INPUT QM 6: (1) 8-wire RJ45 female, QuickMedia input port
Signal Types: Dynamically configurable for RGBHV, component (YPbPr), S-Video (Y/C),
or composite video with stereo program and 2-channels microphone audio;
RGB Format: RGBHV, RGBS, RGsB
RGB Input Resolution, Non-interlaced: 1920 x 1200 maximum (60Hz limit at 1600 x 1200
or higher);
Video/HDTV Formats: NTSC or PAL, HDTV up to 1080i/1080p
Delay Skew Compensation: 0 to 22 nS
Connects to QM output of a QuickMedia device via CRESCAT-QM or CRESCAT-IM cable
[1]
COMP/Pb OUTPUT 1: (1) BNC female
Composite video output, or Pb of secondary component/HDTV video output;
Output Level/Impedance: 1.0 to 1.1 Vp-p (terminated, with 1 Vp-p in), 75 ohms nominal
Y/Y, C/Pr OUTPUT 2: (2) BNC female
S-Video (Y/C) video output, or Y and Pr of secondary component/HDTV video output
Output Level/Impedance: 1.0 to 1.1 Vp-p (terminated, with 1 Vp-p in), 75 ohms nominal
COMP/Pb, Y/Y, C/Pr OUTPUT 3: (3) BNC female, configurable as:
(1) Component/HDTV (YPbPr) video output, or
(1) S-Video (Y/C) output, or
(1) Composite output
Output Level/Impedance: 1.0 to 1.1 Vp-p (terminated, with 1 Vp-p in), 75 ohms nominal
RGBHV OUTPUT 4: (1) DB15HD female
RGBHV, component, S-Video, and composite video output
Formats: RGBHV, RGBS, RGsB, YPbPr, Y/C, composite
RGB/Video Output Level: 0.7 to 0.75 Vp-p (terminated, with 0.7 Vp-p input, unity gain)
RGB/Video Output Impedance: 75 ohms nominal
H/V Sync Output Level/Impedance: 4 to 5 Vp-p, 55 ohms
H/V Sync Polarity: Follows input
TOUCHPANEL CH 5: (1) 8-wire RJ45 female, CAT5 balanced video output port
Dynamically configurable for component (YPbPr), S-Video (Y/C), or composite video
Video/HDTV Formats: NTSC or PAL, HDTV up to 1080i
Output Impedance: 100 ohms balanced
Connects to CH CAT5 balanced video input port of a compatible touchpanel or other
device via CresCAT cable
TOUCHPANEL QM 5: (1) 8-wire RJ45 female, QuickMedia output port
Signal Types: Dynamically configurable for RGBHV, component (YPbPr), S-Video (Y/C),
or composite video with stereo program and 2-channels microphone audio;
RGB Format: RGBHV, RGBS, RGsB
RGB Output Resolution, Non-interlaced: 1920 x 1200 maximum (60Hz limit at 1600 x
1200 or higher);
Video/HDTV Formats: NTSC or PAL, HDTV up to 1080i/1080p
Connects to QM input port of a compatible touchpanel or other QuickMedia device via
CresCAT-QM or CresCAT-IM cable
[1]
Connectors – Control & Power
IR/SERIAL OUT A - D: (4) 2-pin 3.5mm detachable terminal blocks, IR/Serial output ports
IR output up to 1.2 MHz, 1-way serial TTL/RS-232 (0-5 Volts) up to 9600 baud
IR IN: (1) 3-pin 3.5mm detachable terminal block, for CNXRMIRD IR Receiver (sold
separately), allows control from IR wireless remotes using RC-5 command set
INPUT 1 - 4: (1) 5-pin 3.5mm detachable terminal block
Comprises (4) digital/contact closure inputs, rated for 0-24 Volts DC, referenced to GND
Input Impedance: 2.2k ohms pulled up to 5 Volts DC
Logic Threshold: 2.5 Volts DC nominal with 1 Volt hysteresis band
Crestron MPS-250 Multimedia Presentation System 250
MPS-250
Multimedia
Presentation
System
Up to 2
Up to 3
Up to 2
LAN LAN
Amplifier