Hstr-025, En maintenance and cleaning, Quality certification – Dyras HSTR-025 User Manual

Page 7: Copyright, The ce symbol

HSTR-025

MAINTENANCE AND CLEANING

Warning! Before cleaning, always switch off the appliance and

remove the power cable from the mains socket. Wait for the

appliance to cool completely before you start cleaning. Never

immerse it in water or place it under running water.

• To clean the handle, wipe it with a soft cloth that’s been moistened with a few drops

of mild detergent. Next, remove the detergent by wiping with a soft lint-free cloth
moistened with lukewarm water. Finally, wipe the cleaned surfaces with a dry lint-
free cloth. Take care to ensure no moisture enters the appliance. Make sure the hair
straighteners are completely dry before using them again.

• Never use solvents (acetone, benzene, petrol etc.) to clean the appliance

because these materials could dissolve the plastic cover and damage the internal
components. Do not use harsh or abrasive cleaning agents.

• Never scrub or scour the styling plates; this can damage the glossy surface. Any dirt

should be removed with a soft lint-free cloth.

• The styling plates may appear slightly discoloured after long-term use. This is not a

fault and doesn’t affect the operation of the appliance. You can use purified alcohol
(isopropyl alcohol) to remove this discolouration; do not use any other cleaning
liquid. Moisten a clean lint-free cloth with the alcohol and gently wipe the surface
of the styling plates. Take care not to touch other parts or to let any moisture inside
the appliance. Next, wipe with a damp lint-free cloth and finally wipe the cleaned
surfaces with a dry lint-free cloth. Make sure the hair straighteners are completely
dry before using them again.

• If the appliance will not be used for a longer time, after cleaning put it in a nylon bag

and store it in a dust, humidity and frost free storage place. Do not wind the power
cord around the appliance not even for storage, because bending could break or

weaken the insulation of the power cord.

QUALITY CERTIFICATION

We hereby certify that dyras HSTR-025 type hand ceramic plate hair styler complies with
the technical parameters listed below:

Type:

HSTR-025

Description:

Ceramic plate hair styler

Nominal voltage:

230 V ~50 Hz

Power:

max. 25 W

Shock protection class:

II class

Manufacturer:

The dyras wwe.factory Inc. U.S.A.

We are continuously developing our products to keep them up-to-date, which means the technical data of our
appliances may change without any prior notice. Errors and omissions excepted.

COPYRIGHT

All rights - including distribution by film, radio or television, translation, photographic
or audio copying, abstract reprint and other duplication - are specifically reserved. Any
breach may result in legal action.

This appliance meets the requirements for safety and electromagnetic compatibility
(EMC). The relevant ‘CE’ mark can be found on the nameplate, on the packing box and in
the instruction manual.

THE CE SYMBOL