Copyright, The symbol ce, Maintenance and cleaning – Dyras LR-120 User Manual

Page 5: Quality certification, Lr-120, Dear customer

LR-120

COPYRIGHT

All rights - including distribution by film, radio or television, translation, photographic or audio copying, abstract
reprint and other duplication - are specifically reserved. Any breach may result in legal action.

THE SYMBOL CE

This appliance meets the requirements for safety and electromagnetic compatibility (EMC). The relevant ‘CE’ mark
can be found on the nameplate, on the packing box and in the instruction manual.

Dear Customer,

Please visit our website at www.dyras.com where you can learn more about your appliance, new dyras products
and our activities.

You can also register your product online by completing the registration form on our homepage. Registration
offers a number of advantages:

• You’ll receive the latest information, news and recommendations about your new product, either by email or

by post.

• We will inform you about any changes to our service network and the availability of accessories and spare

parts.

• We’ll let you know if any new parts or accessories are available to improve your product (and, for electronic

equipment, if a software/firmware upgrade is available to enhance its functions).

• You’ll be the first to hear about any innovative, new products we release.

•

Turn on the device and place it on the fabric. Use gentle circular movements to remove the lint. Do not press
heavily on the fabric as this may cause damage. The manufacturer is not liable for damage caused by using
too much force.

•

Always turn the device off when you’ve finished using it, even if you’re only pausing for a short while.

MAINTENANCE AND CLEANING

Warning! Always turn the device off before you attempt to clean it.
Very important! Never immerse the device in water or hold it under running water.

•

Carefully remove the lint compartment by pulling it from the device. Empty it, then replace it.

•

Pull the cutting adjustment mechanism off the device. Now dismantle the device by turning the edge of the
shaver screen anti-clockwise. Avoid touching the metal screen itself. Gently pull the cutting blade unit from
the drive shaft. Avoid touching the blades. Use a brush to remove any lint from the shaft and the blades.
Carefully remove any threads tangled around the shaft with a pair of scissors. Next, reassemble the device by
placing the blades on the shaft. The blades will only fit in one position. Replace the shaver screen by turning
it in a clockwise direction, then replace the cutting adjustment mechanism.

•

Clean the outside cover of the appliance with a damp, soft, lint-free cloth and then wipe the cleaned
surfaces with a dry lint-free cloth. Take care not to allow any moisture inside the cover. Let the appliance dry
completely before re-using or storing it.

•

When cleaning the appliance, never use solvent (acetone, benzole, petrol, alcohol, etc.) as these may solve
the casing material, or the internal parts of the appliance if they get into. Do not use cleaning agents with
coarse or grinding effect.

•

Make sure the casing is completely dry before using the device again.

QUALITY CERTIFICATION

We certify that the dyras LR-120 lint remover has the following technical specifications:

Type:

LR-120

Description:

lint remover

Supply voltage:

two 1.5V batteries (LR6/AA size)

Noise emission:

= 80 dB

Manufacturer:

The dyras wwe.factory, Inc. USA.

We are continuously developing our products to keep them up-to-date, which means the technical data of our appliances may change without
any prior notice. Errors and omissions excepted.

User'sManual for LR-120.indd 8-9

2011.03.23. 20:57:55