Quality certification, Copyright, The symbol ce – Dyras HRG-1000 User Manual
Page 6: Maintenance and cleaning, Hrg-1000

EN
HRG-1000
HRG-1000
10
11
•
If you don’t plan to use the appliance for a while after cleaning it, place it in a nylon bag and store it in a place
that is free from dust, damp and frost. Do not wrap the mains cable around the appliance when storing it
because the insulation can deteriorate or break under these circumstances.
QUALITY CERTIFICATION
The dyras HRG-1000 food chopper has the following technical specifications:
Model:
HRG-1000
Description:
Food chopper with glass bowl
Rated mains voltage:
220 to 240 V AC, 50/60 Hz
Mains power consumption:
300 W
Shockproof protection:
Class II
Duration of operation:
intermittent operation
(maximum 30 seconds of use followed by
at least 10 minutes of resting)
Noise emission:
L
WA
= 92 dB
Manufacturer:
The Global Electric Factory, Inc.
We are continuously developing our products to keep them up-to-date, which means the technical data of our appliances may change without
any prior notice. Errors and omissions excepted.
COPYRIGHT
© Copyright The dyras wwe.factory LLC U.S.A.
All rights - including distribution by film, radio or television, translation, photographic or audio copying, abstract
reprint and other duplication - are specifically reserved. Any breach may result in legal action.
THE SYMBOL CE
This appliance meets the requirements for safety and electromagnetic compatibility (EMC). The relevant ‘CE’ mark
can be found on the nameplate, on the packing box and in the instruction manual.
Maximum volumes to be placed in the processing bowl along with recommended processing times are given in
the table below:
Food
Max. amount
Processing time
Parsley
50 g
10 short pulses
Onion
200 g
15 short pulses
Garlic
200 g
10 short pulses
Bread
100 g
10 seconds
Hazelnut
200 g
15 seconds
Cheese
200 g
10 seconds
Chocolate
200 g
10 seconds
Mayonnaise
200 g
15 seconds
Attention!
This appliance is designed for intermittent use. Always allow a break of at least 10 minutes after
a maximum 30 seconds of operation. If the material you’re blending or chopping is denser than
average, reduce the maximum time of use to less than 30 seconds. Always unplug the appliance
when it’s not being used. You may damage the appliance and will invalidate the warranty by
ignoring these instructions.
MAINTENANCE AND CLEANING
Warning! Before you clean the appliance it must be switched off and the mains plug must be
removed from the wall socket.
It is very important not to immerse the motor unit in water or hold it under a water jet.
It is recommended that you rinse the machine and the attachments immediately after use.
•
No part of the appliance or its accessories should be cleaned in a dishwasher.
•
Wash the chopping attachment and the processing bowl in soft water containing a neutral liquid detergent,
then rinse under running water. Before packing away, let the equipment dry completely.
•
Clean the outside cover of the appliance with a damp, soft, lint-free cloth and then wipe the cleaned
surfaces with a dry lint-free cloth. Take care not to allow any moisture inside the cover. Let the appliance dry
completely before re-using or storing it.
•
When cleaning the appliance, never use solvent (acetone, benzole, petrol, alcohol, etc.) as these may solve
the casing material, or the internal parts of the appliance if they get into. Do not use cleaning agents with
coarse or grinding effect.