Connecting iaudio and installing jetshell – Cowon Systems iAUDIO G3 User Manual

Page 26

Text mode
Original mode

iAUDIO G3

Connecting iAUDIO and Installing JetShell

3. Check "Specify a location" and click Browse.
From the "Browse" window, select the [Win98] folder on

the iAUDIO Installation CD, and click OK.

4. USB driver ﬁle for iAUDIO is found. Click Next.

5. The driver ﬁles are copied and installed from the

Installation CD. When the installation ﬁnishes, a message
notifying you of completion appears as shown in the
picture. Click Finish.

6. Finally, make sure that installation of iAUDIO was

completed normally by checking "iAUDIO U2 Digital
Audio Player" displayed under "Harddisk controller" of
"Control Panel / System / Hardware / Device Manager".