CASO Germany IMCG25 - Manual (Page 65)

caso IMCG25 65
Please note
► When using plastic containers out of the deep-freeze, the defrosting process should only last long
enough to be able to remove the frozen food out of the container, after which it can be placed into
a microwave-resistant container.
12.19 Multi-level cooking mode
You can programm 2 cooking sequences.
You can use the multi-level cooking mode only for microwave, grill, convection and
combination-function.
Example: You want to programm two microwave-levels.
1. Choose microwave power level with .
2. Press 10Min/1Min/10Sec, to set the time.
3. Choose the second microwave power level with
4. Press 10Min/1Min/10Sec, to set the time.
5. Close the door of the device.
6. Press Start/Quick Start, to start the cooking programme.
13 Cleaning and Maintenance
This chapter provides you with important notices with regard to cleaning and maintaining the
device. Please observe the notices to prevent damages due to cleaning the device
incorrectly and to ensure trouble-free operation.
13.1 Safety information
Attention
Please observe the following safety notices, before you commence with cleaning the device:
► The oven must be cleaned and food residues must be removed at regular intervals. If the
oven is not maintained in a clean condition, this will have a detrimental effect on the
service life of the device and can also result in a dangerous condition in the device as well
as in the growth of fungus and bacteria.
► Switch the oven off prior to cleaning it and unplug the plug from the wall power outlet.
► The cooking chamber is hot after it is used. There is a danger of burns! Wait until the
device has cooled down.
► Clean the cooking chamber after use as soon as it has cooled down. Extended waiting
unnecessarily complicates cleaning and can make it impossible in extreme cases.
Excessive accumulations of dirt can even damage the device under certain
circumstances.
► If dampness penetrates into the device, this can damage the electronic components.
Please ensure that no liquid can enter the interior of the device through the ventilation
slots.