Brondell Swash 550 - Manual (Page 6)

power stop back front powersave water temp seat temp
4h 6h 8h 10h
2h
water flow
warm air
5
Operation
Some features of the Swash 450 / 550 are designed to function only when seat is occupied.
Using the Swash 450 / 550
Getting Started
Warm Water Washing:
Sit on the seat and press the FRONT or BACK button to begin
water flow. Press the STOP button to discontinue the water flow.
Water Flow/Pressure Adjustment:
While seated, you may adjust the water pressure by pressing the
FRONT or BACK button repeatedly until the desired pressure is
reached. There are five levels of water pressure.
Pulsating Water Mode: (water pressure level must be at 3 or above)
To change to pulsating mode, press and hold the FRONT or BACK button
for over 3 seconds. To deactivate and return to normal washing mode,
repeat the above step.
Warm Air Dryer (available in S550):
Press the WARM AIR button to start the dryer. Press STOP to stop the dryer.
Posterior (Rear)
Cleansing
Feminine (Front)
Cleansing
Seat Temperature
Low>Med>High>Off
Water Temperature
Low>Med>High>Off
Warm Air Dryer
On
Low>Med>High
(available in S550)
Stop
(for Wash and Dryer)
Powersave
Function
CONTROL PANEL
View of
Side Control Panel
Water Pressure
Adjustment
stop back front
water flow
stop back front
water flow
stop back front
water flow
Swash 550
stop warm air
Flow / Timer
LED Indicators
Power
LED Indicator
Swash 450
power stop back front powersave water temp seat temp
4h 6h 8h 10h 2h
water flow Swash 450 TM
Swash 550 TM
Press FRONT or BACK button to fill the bidet tank.
Wait a few minutes to allow the seat & bidet water to warm.