Bplus MP1 - Manual (Page 5)

Mini PCI-E to PCI-E Adapter User’s Manual
Page 4
FAE2009MP1_01 ©2009 Aeneas Electronics
authenticated; searching authenticated; searching
Intermittent
Blink
Activity proportional
to
transmitting/receiving
speed
Activity proportional to
transmitting/receiving
speed
Activity proportional to
transmitting/receiving
speed
For voice applications,
turning off and on the
intermittent blink based
on the ring pulse cycle
can indicate a ring event
TAB-1
TAB-1 defines the recommended use for LED station for each of the three
wireless classes. (W-PAN/W-LAN/W-WAN)
LED state:
1. D1(W-PAN):
When the user plugs W-PAN (Wireless-Personal Area Network) device such
as Bluetooth, short-distance wireless card into Mini PCI-E interface, this LED
shows different station.
More details, please reference TAB-1.
2. D2(W-LAN):
When the user plugs W-LAN (Wireless-Local Area Network) device such as
wireless LAN mini card into Mini PCI-E interface and it performs, this LED
shows different state.
More details, please reference TAB-1.
3. D3(W-WAN):
When the user plugs W-WAN (Wireless-Wide Area Network) device such as
wireless mini card into mini PCI-E interface, this LED shows different state.
More details, please reference TAB-1.
4. D4: Power Indicator
This LED defines the power status. It will be on only when the PC is power on.
5. D5:
This LED defines the power status. It will be on until mini-USB connector
function performs and powers on. That is, it is not available when the PCI-E
function performs.
6. D6: AUX Power Indicator
This LED defines the AUX power status. When the PCI-E function performs, it
will be on at any occasion that includes power-off and power-down mode.