Boori Baby to Youth King Single Bed BO-B2Y - Manual (Page 3)

Screw to be
used through
bed rail bracket
B2Y King Single Bed assembly instructions
3
4
B
A
A: Lay cot end panel on the
floor to make up front base of
King single bed.
B: Sit base onto
2 x A foot and 2 x B foot.
Do not screw B foot at this
stage.
C: Screw bed foot end onto front bed base and
A foot using 2 x J bolts and 2 x L capping nuts.
Bolt to go through front of bed end, capping nut
through back of foot.
Assembling the front base
Capping
nut to be
used in
foot.
B: Screw front base to back
base including bed rail
brackets using 2 x J bolts
and 2 x L capping nuts
making sure bed rail
bracket is facing into end
base.
NOTE:
screw must go through bracket,
middle base, end base and foot.
Joining middle support to front and back base
A:
Screw bed rail bracket, middle base, base
foot B and front base using 2 x J bolts and
2 x L capping nuts making sure bed rail
bracket is facing into end base.
V 07/06