Canon IMAGEFORMULA CR-190I M111021 User Manual

Page 17

Spin the rollers while wiping them clean with a firmly
wrung cloth dampened with water or a mild detergent.

There are 26 roller positions, as shown in the diagram below.

NOTE

• Use cotton swabs to clean the rollers in locations that are too narrow

for your fingers.

• Roller in position c is turned by the roller in position a. Turn the

roller in position a to wipe the rollers.

• Rollers in positions h, j, and l are turned by the roller in position

k.Turn the roller in position k to wipe the rollers.

• Rollers in positions u to z are turned by the roller in position m.

Turn the roller in position m to wipe the rollers.

• Rollers in positions a to c are replaceable. (See “Replacing the

Use cotton swabs that are commercially available to
clean the entire scanning glass.

Close the Back Maintenance Cover.

ԝ
Ԟ

ԧ
Ԩ

Scanning Glass